{"title":"ActivityBot 360","description":null,"products":[{"product_id":"ping-ultrasonic-distance-sensor","title":"PING))) Ultrasonic Distance Sensor","description":"\u003ch5\u003ePING))) Ultrasonic Distance Sensor Overview:\u003c\/h5\u003e\n\u003cp\u003eOur PING)))™ ultrasonic sensor provides an easy method of distance measurement. This sensor is perfect for any number of applications that require you to perform measurements between moving or stationary objects.\u003c\/p\u003e\n\u003cp\u003eInterfacing to a microcontroller is a snap. A single I\/O pin is used to trigger an ultrasonic burst (well above human hearing) and then \"listen\" for the echo return pulse. The sensor measures the time required for the echo return, and returns this value to the microcontroller as a variable-width pulse via the same I\/O pin.\u003c\/p\u003e\n\u003cp\u003eThe PING))) Ultrasonic Distance Sensor is compatible with all Parallax educational robots. It is also supported by many \u003ca href=\"https:\/\/learn.parallax.com\/public_downloads\/microcontroller-kickstarts\/\" rel=\"noopener\" target=\"_blank\"\u003ebonus projects\u003c\/a\u003e for BASIC Stamp, Arduino, Propeller, and micro:bit on our Learn site.\u003c\/p\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eKey Features:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eProvides precise, non-contact distance measurements within a 3 cm to 3 m range\u003c\/li\u003e\n\u003cli\u003eUltrasonic measurements work in any lighting condition, making this a good choice to supplement infrared object detectors\u003c\/li\u003e\n\u003cli\u003eSimple pulse in\/pulse out or simplex UART communication requires just one I\/O pin (UART communication available starting from Rev E)\u003c\/li\u003e\n\u003cli\u003eBurst indicator LED shows measurement in progress\u003c\/li\u003e\n\u003cli\u003e3-pin header makes it easy to connect to a development board, directly or with an extension cable, no soldering required\u003c\/li\u003e\n\u003cli\u003ePCB assembled, tested, and completed in Rocklin, California\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\n\u003cspan class=\"forte\"\u003eApplication Ideas\u003c\/span\u003e:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eSecurity systems\u003c\/li\u003e\n\u003cli\u003eInteractive animated exhibits\u003c\/li\u003e\n\u003cli\u003eParking assistant systems\u003c\/li\u003e\n\u003cli\u003eRobotic navigation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-active ui-corner-top\" role=\"tab\"\u003ePING))) Ultrasonic Distance Sensor Specifications:\u003c\/h5\u003e\n\u003cdiv id=\"details\" class=\"tabbed details ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-tech\"\u003e\n\u003cul\u003e\n\u003cli\u003eNarrow acceptance angle\u003c\/li\u003e\n\u003cli\u003eRange: approximately 1 inch to 10 feet (3 cm to 3 m)\u003c\/li\u003e\n\u003cli\u003e3-pin male header with 0.1\" spacing\u003c\/li\u003e\n\u003cli\u003ePower requirements: +5 VDC; 35 mA active\u003c\/li\u003e\n\u003cli\u003eCommunication: positive TTL pulse \/ simplex UART (UART communication available starting from Rev E)\u003c\/li\u003e\n\u003cli\u003eDimensions: 0.81 x 1.8 x 0.6 in (22 x 46 x 16 mm)\u003c\/li\u003e\n\u003cli\u003eOperating temperature range: +32 to +158 °F (0 to +70 °C)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eResource Links\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/learn.parallax.com\/?s=ping%29%29%29\" rel=\"noopener noreferrer\" target=\"_blank\"\u003ePING tutorials\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397213675829,"sku":"28015","price":37.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/847cfe5a-28015-front.jpg?v=1787781806"},{"product_id":"activitybot-360-12-pack-plus-for-classrooms","title":"ActivityBot 360° 12-Pack Plus for Classrooms","description":"\u003ch5 role=\"tab\"\u003e\u003cspan style=\"color: #ff0000;\"\u003eDue to supply chain disruptions, this product was discontinued.\u003c\/span\u003e\u003c\/h5\u003e\n\u003ch4\u003eReplacement Options\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFor Python or Block-based coding, you could use the \u003ca href=\"\/products\/cyber-bot-robot-12-pack-plus-for-classrooms\/\" rel=\"noopener\" target=\"_blank\"\u003ecyber:bot Robot 12-pack Plus for Classrooms\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor Arduino C coding, you could use the \u003ca href=\"\/products\/shield-bot-with-arduino-12-pack-plus-kit-for-classrooms\/\" rel=\"noopener\" target=\"_blank\"\u003eShield-Bot with Arduino 12-pack Plus Kit for Classrooms\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-default ui-state-active ui-corner-top\" role=\"tab\"\u003eActivityBot 360° 12-Pack Plus Overview:\u003c\/h5\u003e\n\u003cdiv id=\"overview\" class=\"tabbed overview ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-body\"\u003eThe ActivityBot 360° 12-pack Plus is a one-box solution for implementing robotics and other STEM (science, technology, engineering, and math) topics in your classroom. Supported by free tutorials, software, and teacher training, our robots are designed to be beginner-friendly and engaging, while using real-world electronics to build transferable skills. There are 12 total robot sets, and each set includes (1) ActivityBot 360° robot plus our (3) most popular hardware accessories for additional activities. The ActivityBot 360° Robot builds transferable skills in middle school, high school or college robotics, technology, engineering, and programming courses. The web tutorials will guide you and your students step by step — just follow the checkmarks. First, build your ActivityBot. Then, learn about programming its multicore Propeller chip brain. Start building circuits on a breadboard, then make DIY sensor systems so the robots can navigate on their own. Experiment with the additional hardware kits for advanced navigation, and get ready for some classroom challenges. The hardware accessories include rotating Ping))) Distance Sensor Brackets and QTI Line Following kits for advanced navigation, and IR remotes for remote-control applications. In addition to what is included in the kit, numerous other Parallax sensors, hardware add-ons, and accessories are compatible with the robot and its Propeller Activity Board WX. This board accepts common electronics components on its breadboard — no proprietary connectors required! It also sports a mini audio jack and RF module socket for expanding to audio and wireless applications. Our STEM hardware is supported by free \u003ca href=\"https:\/\/hs-articulation.ucop.edu\/agcourselist\/institution\/4902\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eCalifornia A-G certified curriculum\u003c\/a\u003e resources, including web tutorials, assessment materials, classroom challenges, and programming software tools.  Tutorial options include BlocklyProp graphical programming or C language with simplified libraries. Choose your preference, or go from one to the other for a strong foundation and progression.  There is plenty of material for a fully packed semester course, or a more relaxed year-long program with time to experiment with student-designed inventions.\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e12 sets of hardware for 1-to-1 or 2-1 student-to-robot ratios\u003c\/li\u003e\n\u003cli\u003eProgram graphically with our online BlocklyProp tool or locally in text-based C with SimpleIDE\u003c\/li\u003e\n\u003cli\u003eCompatible with Windows, Mac, and Chromebook labs\u003c\/li\u003e\n\u003cli\u003eEnough NiMH AA batteries and chargers to have one set in the robots and one on the chargers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003e\u003cspan class=\"forte\"\u003eFree Training for for Teachers\u003c\/span\u003e\u003c\/strong\u003e Parallax has several options to help you get up and running with our hardware, software, and tutorials so you can feel confident launching your program. See our \u003ca href=\"https:\/\/www.parallax.com\/professional-development\/\" target=\"_blank\" rel=\"noopener\"\u003eProfessional Development\u003c\/a\u003e and our Events pages for details.\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eOrdering and Shipping\u003c\/span\u003e\u003c\/h5\u003e\nYou may order online with a credit card, or place a school purchase order by phone (888-512-1024), email (\u003ca href=\"mailto:sales@parallax.com\" target=\"_blank\" rel=\"noopener\"\u003esales@parallax.com\u003c\/a\u003e) or fax (916-624-8003). UPS ground shipping recommended.\u003c\/div\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eActivityBot 360° 12-Pack Plus Kit Contents\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e(12) - ActivityBot 360° Robot Kit (#32600)\u003c\/li\u003e\n\u003cli\u003e(12) - QTI Line Follower AppKit (#28108)\u003c\/li\u003e\n\u003cli\u003e(12) - Ping))) Bracket Kit (#570-28015)\u003c\/li\u003e\n\u003cli\u003e(12) - Universal Remote (#020-00001)\u003c\/li\u003e\n\u003cli\u003e(10) - AA NiMH Rechargeable batteries, 12-pack (#752-00022)\u003c\/li\u003e\n\u003cli\u003e(5) - 12-cell AA\/AAA NiMH Battery Charger (#752-00021)\u003c\/li\u003e\n\u003cli\u003e(3) - Small Robot Electronics Refresher Pack (#572-28132)\u003c\/li\u003e\n\u003cli\u003e(2) - Small Robot Hardware Refresher Pack (#570-35000)\u003c\/li\u003e\n\u003c\/ul\u003e\n \u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397213610293,"sku":"32612","price":4381.08,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/656feac7-32612b.jpg?v=1787781806"},{"product_id":"activitybot-360-robot-kit","title":"ActivityBot 360° Robot Kit","description":"\u003ch5 role=\"tab\"\u003e\u003cspan style=\"color: #ff0000;\"\u003eDue to supply chain disruptions, this product was discontinued.\u003c\/span\u003e\u003c\/h5\u003e\n\u003ch4\u003eReplacement Options\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFor Python or Block-based coding, you could use the \u003ca href=\"\/products\/cyber-bot-robot-kit-with-micro-bit\/\" target=\"_blank\" rel=\"noopener\"\u003ecyber:bot Robot Kit with micro:bit.\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor Arduino C coding, you could use the \u003ca href=\"\/products\/robotics-with-the-boe-shield-bot-for-arduino\/\" rel=\"noopener\" target=\"_blank\"\u003eRobotics with the Shield-Bot for Arduino\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eActivityBot 360° Robot Kit Overview\u003c\/h5\u003e\n\u003cp\u003eReady for robotics? The smart little ActivityBot 360° Robot can get you started and take you a long way. It is easy to program visually with BlocklyProp, or in C with simplified libraries. Feedback 360° High Speed Servos with built-in encoders make for fast, consistent maneuvers. A variety of sensors and components come in the kit. Its Propeller Activity Board WX features built-in support for audio and wireless upgrades.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/learn.parallax.com\/tutorials\/grade\/grades-9\/activitybot\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e\u003cspan class=\"forte\"\u003eFree web tutorials\u003c\/span\u003e\u003c\/a\u003e guide you step by step — just follow the checkmarks. First, build your ActivityBot. Then, learn about programming its multicore Propeller chip brain. Start building circuits on a breadboard, then make DIY sensor systems so your robot can navigate on its own. Tutorial options include BlocklyProp graphical programming or C language with simplified libraries. Choose your preference, or go from one to the other for a strong foundation and progression.\u003c\/p\u003e\n\u003cp\u003eThe ActivityBot 360° Robot is ready for tinkering. Add off-the-shelf components, additional sensors, and upgrade kits. The Propeller Activity Board WX sports a mini audio jack and a socket for an optional RF module (not included).\u003c\/p\u003e\n\u003cp\u003eThe ActivityBot 360° Robot builds transferable skills in middle school, high school or college robotics, technology, engineering, and programming courses, and is California A-G certified. Recommended for ages 14 and up.\u003c\/p\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eActivityBot 360° Robot Kit Features\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eFree BlocklyProp Solo online graphical programming for Chromebook, Windows, and Mac\u003c\/li\u003e\n\u003cli\u003eFree C language programming with SimpleIDE software for Windows and Mac\u003c\/li\u003e\n\u003cli\u003ePropeller Activity Board WX (#32912) makes it quick to integrate sensors, motors, and more\u003c\/li\u003e\n\u003cli\u003eFeedback 360° High-speed servo motors with built-in encoders make fast, consistent maneuvers\u003c\/li\u003e\n\u003cli\u003ePlug common electronic parts right into the breadboard or 3-pin headers.  No soldering or special connectors needed!\u003c\/li\u003e\n\u003cli\u003eParts included for DIY navigation sensors that use touch, visible light, infrared light and ultrasonics\u003c\/li\u003e\n\u003cli\u003eBuilt-in SD card slot ready for data-logging and file storage with our \u003ca href=\"\/products\/8-gb-microsdhc-card\/\" target=\"_blank\" rel=\"noopener\"\u003epre-formatted 8 GB microSD card (sold separately)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eApplication Ideas\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eA great hobby kit for exploring robotics, electronics and programming\u003c\/li\u003e\n\u003cli\u003eAn affordable STEM education platform to provide a high robot\/student ratio\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"forte\"\u003eNote:\u003c\/span\u003e\u003c\/strong\u003e The ActivityBot 360° Robot requires five 1.5 V AA alkaline batteries, or 5 \u003ca href=\"\/products\/1-2-v-aa-ni-mh-rechargeable-batteries-12-pack\/\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e1.2 V NiMH rechargeable batteries (#752-00022)\u003c\/a\u003e, not included. The ActivityBot 360° replaces the original ActivityBot Robot Kit with external encoders (#32500).\u003c\/p\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eActivityBot 360° Specifications:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003ePower requirements:\n\u003cul\u003e\n\u003cli\u003eFive 1.5 V AA batteries (not included) - OR -\u003c\/li\u003e\n\u003cli\u003eFive 1.2 V NiMH rechargeable batteries (not included, \u003ca href=\"\/products\/1-2-v-aa-ni-mh-rechargeable-batteries-12-pack\/\" rel=\"noopener noreferrer\" target=\"_blank\"\u003esold separately #752-00022\u003c\/a\u003e)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eCommunication: USB 2.0 for programming and serial port debugging\u003c\/li\u003e\n\u003cli\u003eDimensions: 4 x 4.5 x 5.7 inches (10 x 14.4 x 11.5 cm) assembled, without sensors\u003c\/li\u003e\n\u003cli\u003eOperating temperature range: 5 to 158 °F (-15 to +70 °C)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\n\u003cspan class=\"forte\"\u003eActivityBot 360° Robot\u003c\/span\u003e\u003cspan class=\"forte\"\u003e Kit\u003c\/span\u003e\u003cspan class=\"forte\"\u003e Contents:\u003c\/span\u003e\n\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e(1)  - Propeller Activity Board WX (#32912)\u003c\/li\u003e\n\u003cli\u003e(2)  - Parallax Feedback 360° High Speed Servos (#900-00360)\u003c\/li\u003e\n\u003cli\u003e(1)  - PING))) Ultrasonic Distance Sensor (#28015)\u003c\/li\u003e\n\u003cli\u003e(1)  - Small Robot Chassis (#700-00022)\u003c\/li\u003e\n\u003cli\u003e(2)  - Small Robot Wheel and Tire (#28114)\u003c\/li\u003e\n\u003cli\u003e(1)  - 1\" Tail Wheel Ball (#700-00009)\u003c\/li\u003e\n\u003cli\u003e(1)  - 5 AA Battery Holder (#753-00007)\u003c\/li\u003e\n\u003cli\u003e(1)  - Parallax Screwdriver (#700-00064)\u003c\/li\u003e\n\u003cli\u003e(1)  - Parallax Combination Wrench (#700-10025)\u003c\/li\u003e\n\u003cli\u003e(1)  - USB A to Mini-B Cable (#805-00006)\u003c\/li\u003e\n\u003cli\u003e(1)  - Electronics pack with passive components plus light, touch, and infrared sensors\u003c\/li\u003e\n\u003cli\u003e(1)  - Hardware pack with all the screws, nuts, and standoffs needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e A shunt jumper connects two pins next to each set of servo port 3-pin headers. This jumper selects the servo port voltage (5V or VIN) and the port will not receive power without this jumper. If replacements for this part are needed, \u003ca href=\"\/pages\/contact-us\/\" target=\"_blank\" rel=\"noopener\"\u003econtact our sales department\u003c\/a\u003e to order part #452-00043; there are three per board.\u003c\/p\u003e\n\u003ch5\u003e\n\u003cspan class=\"forte\"\u003eWhere's the Book?\u003c\/span\u003e\u003cbr\u003eWe chose web tutorials for the ActivityBot 360° Robot so we could:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eBring you fresh updates, new activities, and bonus projects faster\u003c\/li\u003e\n\u003cli\u003eAdd more sensors, instead of more paper, to your kit\u003c\/li\u003e\n\u003cli\u003eChoose a box that fits the assembled robot, instead of a book\u003c\/li\u003e\n\u003cli\u003eSave on weight to lower your shipping costs and use less fuel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTo work off-line, go to the first page of the web tutorial and click \"Printer-friendly version\" to save or print the entire tutorial from a single file.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397213643061,"sku":"32600","price":279.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/a7a471d1-32600.jpg?v=1787781806"},{"product_id":"qti-line-follower-appkit-for-the-small-robot","title":"QTI Line Follower AppKit for the Small Robot","description":"\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-default ui-state-active ui-corner-top\" role=\"tab\"\u003eQTI Line Follower AppKit  Overview:\u003c\/h5\u003e\n\u003cdiv id=\"overview\" class=\"tabbed overview ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-body\"\u003e\n\u003cp\u003eThe QTI Line Follower AppKit uses an array of QTI infrared emitter\/receiver modules to easily enhance the line-following capability of your \u003ca href=\"\/products\/boe-bot-robot-kit-usb\/\" target=\"_blank\" rel=\"noopener\"\u003eBoe-Bot\u003c\/a\u003e, \u003ca href=\"\/products\/activitybot-360-robot-kit\/\" target=\"_blank\" rel=\"noopener\"\u003eActivityBot 360°\u003c\/a\u003e, \u003ca href=\"\/products\/robot-shield-with-arduino\/\" target=\"_blank\" rel=\"noopener\"\u003eArduino based Shield-Bot\u003c\/a\u003e, or \u003ca href=\"\/products\/cyber-bot-robot-kit-with-micro-bit\/\" target=\"_blank\" rel=\"noopener\"\u003emicro:bit based cyber:bot robot\u003c\/a\u003e. Mount three or four sensors underneath the chassis, and adjust the position to detect lines of different widths. Learning to use the QTI is easy with the illustrated instructions and example code for BlocklyProp, Propeller C, BASIC Stamp, Arduino, or micro:python. Just browse the Downloads tab below. This kit includes all the circuit and sensor hardware you need to add QTIs to your Parallax small robot.\u003c\/p\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eKey Features:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for close proximity infrared detection\u003c\/li\u003e\n\u003cli\u003eUse as a digital sensor array to detect black lines in order to follow electrical tape courses or navigate mazes\u003c\/li\u003e\n\u003cli\u003eUse as an analog sensor to detect shades of gray\u003c\/li\u003e\n\u003cli\u003eChallenge your friends by setting up a robot line following competitions!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan class=\"rotforte\"\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/span\u003e \u003c\/span\u003eYou will need to supply your own robot, white poster board, and black electrical tape.\u003c\/p\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eQTI Line Follower AppKit  Kit Contents:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e(4) 10 k 1\/4 watt resistors\u003c\/li\u003e\n\u003cli\u003e(4) 3-pin male-male headers\u003c\/li\u003e\n\u003cli\u003e(4) QTI sensor modules\u003c\/li\u003e\n\u003cli\u003e(4) 3\/8\" 4-40 pan-head screws\u003c\/li\u003e\n\u003cli\u003e(4) nylon washers\u003c\/li\u003e\n\u003cli\u003e(4) 1\" round standoffs\u003c\/li\u003e\n\u003cli\u003e(4) 7\/8 inch 4-40 pan-head screws\u003c\/li\u003e\n\u003cli\u003e(4) ½ inch round spacers\u003c\/li\u003e\n\u003cli\u003e(2) bags of 10 3\" jumper wires\u003c\/li\u003e\n\u003cli\u003e(4) 12-inch servo cable extenders\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDocumentation, RoHS CE and UKCA Declarations of Conformity are available below and under the Downloads tab.\u003c\/p\u003e\n\u003ch4\u003eResource Links\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/learn.parallax.com\/tutorials\/robot\/activitybot\/qti-line-following-activitybot-blocklyprop\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eQTI Line Following ActivityBot with BlocklyProp\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/learn.parallax.com\/tutorials\/robot\/cyberbot\/qti-line-follower-cyberbot\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eQTI Line Follower for the cyber:bot\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/learn.parallax.com\/courses\/boe-bot-line-following-with-qti-sensors-project\/\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eBoe-Bot Line Following with Four QTI Sensors – BASIC Stamp Project\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/z0benv-j1.myshopify.com\/pages\/basic-stamp\" target=\"_blank\" rel=\"noopener\"\u003eMore Boe-Bot Robot Add-ons, Accessories, and Spare Parts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397215150389,"sku":"28108","price":44.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/730d66ee-28108-cb.jpg?v=1787781809"},{"product_id":"tank-tread-kit","title":"Tank Tread Kit","description":"\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-default ui-state-active ui-corner-top\" role=\"tab\"\u003eTank Tread Kit Overview:\u003c\/h5\u003e\n\u003cdiv id=\"overview\" class=\"tabbed overview ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-body\"\u003e\n\u003cp\u003eTurn your Parallax robot into mini-tank with the Tank Tread add-on kit!  Custom-made clear acrylic side panels mount to your robot's aluminum chassis, and hold sets of small rollers for the rubber treads.  A toothed gear replaces your robot's usual wheels, to drive the treads.\u003c\/p\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eTank Tread Kit Features:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with the Boe-Bot, Shield-Bot, ActivityBot, and cyber:bot robot kits.\u003c\/li\u003e\n\u003cli\u003eTurns your robot into tank that can traverse rugged terrain.\u003c\/li\u003e\n\u003cli\u003eIncludes standoffs that protect components in case of a roll-over.\u003c\/li\u003e\n\u003cli\u003eTreads and higher ground clearance goes over objects that wheels cannot.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003e\u003cspan class=\"rotforte\"\u003eNOTE:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e Robot not included!\u003c\/p\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eTank Tread Kit Contents:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e2 - Clear acrylic tank side panels\u003c\/li\u003e\n\u003cli\u003e1 - Tank wheel and tread set (pre-drilled)\u003c\/li\u003e\n\u003cli\u003e8 - 4-40, 1\/4\" pan head screw\u003c\/li\u003e\n\u003cli\u003e8 - 4-40, 3\/8\" pan head screw\u003c\/li\u003e\n\u003cli\u003e8 - 4-40, 7\/8\" pan head screw\u003c\/li\u003e\n\u003cli\u003e2 - 4-40, 1.5\" pan head screw\u003c\/li\u003e\n\u003cli\u003e10 - #4 lock washers\u003c\/li\u003e\n\u003cli\u003e24 - 4-40, zinc plated nut\u003c\/li\u003e\n\u003cli\u003e2 - 1.25\" aluminum standoff\u003c\/li\u003e\n\u003cli\u003e2 - Servo horns\u003c\/li\u003e\n\u003cli\u003e1 - Documentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eKit Compatibility:\u003c\/h5\u003e\n\u003cp\u003eNote that the Tank Treads are not compatible with the external encoders that read robots' spoked wheels on the original ActivityBot (#32500, discontinued).  See the Tank Tread Product Guide for details and programming tips, plus notes about using the Tank Treads with other Robot Accessories.\u003c\/p\u003e\n\u003ch4\u003eResource Links\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/robotics-kits-platforms?page=1\/\" target=\"_blank\" rel=\"noopener\"\u003eMore Boe-Bot Robot Add-ons, Accessories, and Spare Parts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397215052085,"sku":"28106","price":39.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/fdcad7e3-28106.png?v=1787781809"},{"product_id":"ping-mounting-bracket-kit","title":"PING))) Mounting Bracket Kit","description":"\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-default ui-state-active ui-corner-top\" role=\"tab\"\u003ePING))) Mounting Bracket Kit Overview:\u003c\/h5\u003e\n\u003cdiv id=\"overview\" class=\"tabbed overview ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-body\"\u003e\n\u003cp\u003eEquip your Boe-Bot, ActivityBot, Shield-Bot with Arduino, or cyber:bot with micro:bit to make a 180° sweep of its environment with the \u003ca href=\"\/products\/ping-ultrasonic-distance-sensor\/\" rel=\"noopener\" target=\"_blank\"\u003ePING))) Ultrasonic Distance Sensor\u003c\/a\u003e. Great for autonomous navigation, or to hone in on a specific object. Kit includes a\u003ca href=\"\/products\/parallax-standard-servo\" rel=\"noopener\" target=\"_blank\"\u003e Parallax Standard Servo\u003c\/a\u003e, aluminum brackets and complete mounting hardware. See the Downloads and Additional Resources tabs below for robotics projects.\u003c\/p\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003ePING))) Mounting Bracket Kit Features:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eMounting platform for the PING))) sensor module on a robot\u003c\/li\u003e\n\u003cli\u003eSturdy brackets for PING))) sensor and servo\u003c\/li\u003e\n\u003cli\u003eEasy to install and use\u003c\/li\u003e\n\u003cli\u003eAdds distance detection to a project\u003c\/li\u003e\n\u003cli\u003eNon-intrusive frequency band (40 kHz)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan class=\"forte\"\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/span\u003e \u003c\/span\u003ePING))) Ultrasonic Distance Sensor not included. See the \u003ca href=\"\/products\/ping-ultrasonic-sensor-mounting-bracket\" target=\"_blank\" rel=\"noopener\"\u003ePING))) Ultrasonic Sensor + Mounting Bracket\u003c\/a\u003e to purchase both items together.\u003c\/p\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003ePING))) Mounting Bracket Kit Contents:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e(5)  - Nut, #4-40, Zinc (#700-00003)\u003c\/li\u003e\n\u003cli\u003e(2)  - Nut, #4-40, Nylon (#700-00036)\u003c\/li\u003e\n\u003cli\u003e(3)  - Washer, #4, Nylon (#700-00036)\u003c\/li\u003e\n\u003cli\u003e(1)  - Rubber Grommet, 13\/32\" (#700-00025)\u003c\/li\u003e\n\u003cli\u003e(5)  - Screw,#4-40 x 1\/4\" Phillips pan-head (#700-00028)\u003c\/li\u003e\n\u003cli\u003e(2)  - Screw,#2-56 x 1\/4\" Phillips pan-head (#700-00062)\u003c\/li\u003e\n\u003cli\u003e(2)  - Nylon Screw, #4-40 x 1\/2\" (#710-00050)\u003c\/li\u003e\n\u003cli\u003e(2)  - Nut, 2-56 (#711-00001)\u003c\/li\u003e\n\u003cli\u003e(2)  - Nylon Spacer, #4x1\/4\" (#713-00005)\u003c\/li\u003e\n\u003cli\u003e(2)  - Universal Straight Bracket (#720-00012)\u003c\/li\u003e\n\u003cli\u003e(1)  - PING))) Aluminum Mounting Bracket (#720-28015)\u003c\/li\u003e\n\u003cli\u003e(1)  - 3-wire Extension Cable, 12\" (#800-00120)\u003c\/li\u003e\n\u003cli\u003e(1)  - Parallax Standard Servo (#900-00005)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eResource Links\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.parallax.com\/courses\/shield-bot-roaming-with-ping-2\/\" rel=\"noopener\" target=\"_blank\"\u003eRoaming Ping))) Shield-Bot Arduino Project\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.parallax.com\/tutorials\/robot\/cyberbot\/cyberbot-roaming-ping\/\" rel=\"noopener\" target=\"_blank\"\u003eCyber:bot Roaming Ping))) Project\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/learn.parallax.com\/tutorials\/robot\/activitybot\/pingdar-display-activitybot-and-blocklyprop\/\" rel=\"noopener\" target=\"_blank\"\u003ePing)))Dar Display with ActivityBot and BlocklyProp Project\u003c\/a\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397215215925,"sku":"570-28015","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/17e80502-570-28015.png?v=1787781810"},{"product_id":"ir-remote-parts-kit","title":"IR Remote Parts Kit","description":"\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-default ui-state-active ui-corner-top\" role=\"tab\"\u003eIR Remote Parts Kit Overview:\u003c\/h5\u003e\n\u003cdiv id=\"overview\" class=\"tabbed overview ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-body\"\u003e\n\u003cp\u003eWith a universal remote and an infrared receiver, you can add a wireless keypad to your microcontroller applications. The parts in this kit along with the example programs make it possible to enter values and control your projects in the same way you might with a TV or other entertainment system component. Applications and sample code for all BASIC Stamp models, Arduino for the Shield-Bot, Propeller C and BlocklyProp for the ActivityBot, and MicroPython for the cyber:bot are linked below; be sure to check out both the Downloads and Additional Resources.\u003c\/p\u003e\n\u003cp\u003eThe remote comes un-programmed; use its enclosed instructions or \u003ca href=\"https:\/\/youtu.be\/nkqqFhyIuqo\" rel=\"noopener\" target=\"_blank\"\u003efollow the video\u003c\/a\u003e to set it to Sony protocol for use with Parallax projects.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003e\u003cspan class=\"rotforte\"\u003eNote:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e Requires 2 alkaline AA batteries, not included.\u003c\/p\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eIR Remote Parts Kit Contents:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal Remote with manufacturer manual (#020-00001)\u003ca href=\"https:\/\/www.parallax.com\/node\/436\"\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eIR detector (#350-00056)\u003c\/li\u003e\n\u003cli\u003e220 ohm Resistor (#150-02210)\u003c\/li\u003e\n\u003cli\u003eJumper wires (bag of 10) (#800-00016)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eResource Links\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/youtu.be\/nkqqFhyIuqo\/\" rel=\"noopener\" target=\"_blank\"\u003eTiny Tutorials: Setting up your Sony Remote for Robotics\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/learn.parallax.com\/project\/ir-remote-controlled-shield-bot\/\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eIR Remote Controlled Shield-Bot –  Arduino Project \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.parallax.com\/tutorials\/robot\/cyberbot\/control-your-cyberbot-infrared-tv-remote\/\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eControl your cyber:bot with an Infrared TV Remote \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/learn.parallax.com\/project\/remote-control-rock-talk-and-roll-activitybot\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eRemote Control Rock, Talk \u0026amp; Roll ActivityBot – Propeller C Project\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/learn.parallax.com\/propeller-c-simple-devices\/ir-receiver-and-remote\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eIR Receiver and Remote – Propeller C Tutorial \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/learn.parallax.com\/ab-blocks\/sony-remote\" rel=\"noopener\" target=\"_blank\"\u003eBlocklyProp Block Reference\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/learn.parallax.com\/tutorials\/robot\/activitybot\/ir-remote-control-activitybot-blockly\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eIR Remote Control ActivityBot with Blockly \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/robotics-kits-platforms\/\" rel=\"noopener\" target=\"_blank\"\u003eMore Boe-Bot Robot Add-ons, Accessories, and Spare Parts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397215379765,"sku":"29122","price":14.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/2fb36289-29122.png?v=1787781809"},{"product_id":"crawler-kit-for-the-parallax-small-robot","title":"Crawler Kit for the Parallax Small Robot","description":"\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-default ui-state-active ui-corner-top\" role=\"tab\"\u003eCrawler Kit  Overview:\u003c\/h5\u003e\n\u003cdiv id=\"overview\" class=\"tabbed overview ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-body\"\u003e\n\u003cp\u003eMake your\u003ca href=\"\/products\/boe-bot-robot-kit-usb-serial\/\" target=\"_blank\" rel=\"noopener\"\u003e BASIC Stamp Boe-Bot (\u003cspan\u003e28132)\u003c\/span\u003e\u003c\/a\u003e, \u003ca href=\"\/products\/cyber-bot-robot-kit-with-micro-bit\/\" target=\"_blank\" rel=\"noopener\"\u003ecyber:bot with micro:bit (\u003cspan\u003e32700)\u003c\/span\u003e\u003c\/a\u003e,  \u003ca href=\"\/products\/robot-shield-with-arduino\/\" target=\"_blank\" rel=\"noopener\"\u003eShield-Bot with Arduino (\u003cspan\u003e32335)\u003c\/span\u003e\u003c\/a\u003e, or \u003ca href=\"\/products\/activitybot-360-robot-kit\/\" target=\"_blank\" rel=\"noopener\"\u003ePropeller ActivityBot 360° (\u003cspan\u003e32600)\u003c\/span\u003e\u003c\/a\u003e into a creepy crawling robot with this accessory kit. Includes printed documentation with detailed assembly instructions. The Crawler runs on standard BASIC Stamp, C, Arduino, or micro:bit source code with only minor adjustments for ground speed. Suggestions on how to adapt your robot code is included in the documentation download. Robot not included!\u003c\/p\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eKey Features:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e6-legged add-on gives the robot crawling-like movement\u003c\/li\u003e\n\u003cli\u003eEasy to assemble and compatible with most existing programs*\u003c\/li\u003e\n\u003cli\u003eRubber feet for added traction and surface protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e*Compatible with the ActivityBot 360°, but not the original ActivityBot with external encoders BlocklyProp code.\u003c\/p\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eCrawler Kit Contents:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e2 - Crawler Side\u003c\/li\u003e\n\u003cli\u003e2 - Middle Leg\u003c\/li\u003e\n\u003cli\u003e4 - Leg\u003c\/li\u003e\n\u003cli\u003e4 - Push Arm\u003c\/li\u003e\n\u003cli\u003e6 - Rubber Feet\u003c\/li\u003e\n\u003cli\u003e12 - Plastic Screw Cover\u003c\/li\u003e\n\u003cli\u003e6 - 4-40 1\/4\" Phillips Pan Head Screw\u003c\/li\u003e\n\u003cli\u003e10 - 4-40 3\/8\" Phillips Pan Head Screw\u003c\/li\u003e\n\u003cli\u003e2 - 4-40 5\/8\" Phillips Pan Head Screw\u003c\/li\u003e\n\u003cli\u003e6 - 4-40 Hex Nut\u003c\/li\u003e\n\u003cli\u003e6 - 4-40 Nylon Insert Locknut\u003c\/li\u003e\n\u003cli\u003e2 - 4-40 3\/4\" Nylon Standoff\u003c\/li\u003e\n\u003cli\u003e4 - 4-40 1\" Nylon Standoff\u003c\/li\u003e\n\u003cli\u003e8 - #4 .031\" Nylon Washer, Large\u003c\/li\u003e\n\u003cli\u003e4 - #4 1\/16\" Nylon Spacer\u003c\/li\u003e\n\u003cli\u003e2 - #4 1\/8\" Nylon Spacer\u003c\/li\u003e\n\u003cli\u003e6 - #4 Phillips Self Taping Screw\u003c\/li\u003e\n\u003cli\u003e2 - Servo Horn\u003c\/li\u003e\n\u003cli\u003e1 - Documentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eResource Links\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/robotics-kits-platforms\/\" rel=\"noopener\" target=\"_blank\"\u003eMore Boe-Bot Robot Add-ons, Accessories, and Spare Parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"http:\/\/learn.parallax.com\/activitybot\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eActivityBot Web Tutorials\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"http:\/\/learn.parallax.com\/ShieldRobot\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eBOE Shield for Arduino Tutorials\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397215346997,"sku":"30055","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/6f5b6752-30055a.png?v=1787781810"},{"product_id":"parallax-wx-esp8266-wifi-module-dip","title":"Parallax WX ESP8266 WiFi Module - DIP","description":"\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-default ui-state-active ui-corner-top\" role=\"tab\"\u003eWX ESP8266 WiFi Module Overview:\u003c\/h5\u003e\n\u003cdiv id=\"overview\" class=\"tabbed overview ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-body\"\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"forte\"\u003eThis DIP package works specifically with the (3.3 V) Propeller Activity Board, Scribbler S3, and ActivityBot WX robot. For BASIC Stamp and breadboard projects we recommend the breadboard-friendly \u003ca href=\"\/products\/parallax-wx-esp8266-wifi-module-sip\/\" target=\"_blank\" rel=\"noopener\"\u003eSIP package (\u003cspan\u003e32420S)\u003c\/span\u003e\u003c\/a\u003e.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Parallax WX ESP8266 Wi-Fi module adds a new dimension of connectivity to your microcontroller applications.  Special pre-loaded firmware makes it easy to configure the module to fit your project. Just connect to the module with your smartphone, tablet, or computer’s web browser.  This DIP form factor is designed to plug right into the Propeller Activity Board WX; it is also available in a breadboard-friendly \u003ca href=\"\/products\/parallax-wx-esp8266-wifi-module-sip\/\" rel=\"noopener\" target=\"_blank\"\u003eSIP\u003c\/a\u003e module.\u003c\/p\u003e\n\u003cp\u003eThe Parallax WX ESP8266 Wi-Fi module can be its own wireless access point (AP), a station (STA) on another Wi-Fi network, or both at once briefly to join another network.  In either mode, it can serve its own configuration pages as well as user-created web pages that make it possible for devices to interact with a microcontroller through the Wi-Fi module.  It can also send and receive a variety of TCP\/IP messages for Internet of Things (IoT) projects, on Wi-Fi networks configured to allow it access.  By serving its own firmware upgrade page, this module allows you to pick and upload the latest open source firmware revision, or even variations that support specific applications as they become available.\u003c\/p\u003e\n\u003cp\u003eBridge STEM and robotics efforts with computer science and web design programs. The Parallax WX ESP8266 Wi-Fi module brings a new IoT-capable dimension to an existing fleet of educational robots, and opens up opportunities to explore how HTML and Javascript can interact with embedded systems.  \u003ca href=\"http:\/\/learn.parallax.com\/tutorials\/language\/propeller-c\/parallax-wx-wi-fi-module-prop-c\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eTutorials are available on Learn\u003c\/a\u003e for using this DIP module with our Propeller Activity Board WX and\/or ActivityBot Robot.  (If you are using a Boe-Bot Robot, get the SIP version of this module and follow these \u003ca href=\"http:\/\/learn.parallax.com\/tutorials\/language\/pbasic\/parallax-wx-wi-fi-module-bs2\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eBASIC Stamp tutorials for the WX Wi-Fi module.)\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eFeatures:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eDIP form factor plugs right into the Wi-Fi module socket on the Propeller Activity Board (Original and WX)\u003c\/li\u003e\n\u003cli\u003e2.4 GHz Wi-Fi access through FCC\/CE approved ESP8266-WROOM-02 module\u003c\/li\u003e\n\u003cli\u003eSupports HTTP (server), WebSocket (server), and TCP (client) connections\u003c\/li\u003e\n\u003cli\u003eBuilt-in web pages for easy access to configuration settings, networks, file uploads and over-the-air firmware updates\u003c\/li\u003e\n\u003cli\u003eAbout 1 MB of user file system space for storing web pages and other content\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eApplication Ideas:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eLog into a Propeller ActivityBot with a laptop, tablet, or smartphone to remote control and monitor its sensors via a web page hosted on the WX Wi-Fi module\u003c\/li\u003e\n\u003cli\u003eEquip your project to send emails or tweets using a service such as IFTTT\u003c\/li\u003e\n\u003cli\u003eDIY internet-connected sprinkler system, pet feeder, or thermostat\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eWX ESP8266 WiFi Module Specifications:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eDevice: FCC and CE approved ESP8266-WROOM-02\u003c\/li\u003e\n\u003cli\u003eWi-Fi Protocols: 802.11 b\/g\/n\u003c\/li\u003e\n\u003cli\u003eNetwork Protocols: IPv4, TCP\/HTTP\u003c\/li\u003e\n\u003cli\u003eSecurity: WPA\/WPA2\u003c\/li\u003e\n\u003cli\u003eEncryption: WEP\/TKIP\/AES\u003c\/li\u003e\n\u003cli\u003eVoltage requirement: 3.3 VDC supplied through the Activity Board's WX socket\u003c\/li\u003e\n\u003cli\u003eWi-Fi range: 30 meters LOS\u003c\/li\u003e\n\u003cli\u003eLogic levels: output high 3.3 V, low 0 V, input high \u0026gt; 1.5 V, input low \u0026lt; 1.5 V\u003c\/li\u003e\n\u003cli\u003eCurrent requirements: Typical 75 mA, with Wi-Fi transmit peaks up to 360 mA\u003c\/li\u003e\n\u003cli\u003eDIP WX: 0.078” (2mm) spaced dual row of 10 straight pins\u003c\/li\u003e\n\u003cli\u003ePCB Dimensions: Approximately 1.0 x 1.5 in (26 x 37.5 mm)\u003c\/li\u003e\n\u003cli\u003eOperating temp range: +32 to +158 °F (0 to +70 °C)\u003c\/li\u003e\n\u003cli\u003ePCB assembled, tested, and completed in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003e\u003cspan class=\"rotforte\"\u003eNOTE:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e This module is NOT compatible with the Parallax XBee Adapter Board product family.\u003c\/p\u003e\n\u003ch4\u003eResource Links\u003c\/h4\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/learn.parallax.com\/tutorials\/language\/propeller-c\/parallax-wx-wi-fi-module-prop-c\" rel=\"noopener noreferrer\" target=\"_blank\"\u003ePropeller C tutorials for the WX Wi-Fi DIP module\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397215543605,"sku":"32420D","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/e73d5e54-32420D.png?v=1787781809"},{"product_id":"gripper-3-0-for-parallax-small-robots","title":"Gripper 3.0 for Parallax Small Robots","description":"\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-default ui-state-active ui-corner-top\" role=\"tab\"\u003eGripper 3.0 Overview:\u003c\/h5\u003e\n\u003cdiv id=\"overview\" class=\"tabbed overview ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-body\"\u003e\n\u003cp\u003eThe Gripper 3.0 is a precision CNC-machined end-effector design for all of Parallax’s small robots. It is available individually here, and in the \u003ca href=\"\/products\/gripper-3-0-12-pack\/\" rel=\"noopener\" target=\"_blank\"\u003eGripper 3.0 12-pack for classrooms (\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e28212)\u003c\/span\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eThe single servo actuates the grab-and-lift motion with only a small amount of linear movement. The tension between the Gripper plates is determined by a torsion spring which also holds the plates down until the Gripper has closed on the object, with remaining servo motion lifting the object from the surface. The programmer only needs to determine the servos opened\/lowered, closed\/raised position and the rate at which the transition occurs without consideration of the width of the object (provided it fits within the Gripper’s paddles).\u003c\/p\u003e\n\u003cp\u003eParallax’s ActivityBot 360°, Boe-Bot, Shield-Bot for Arduino, and cyber:bot are compatible with the Gripper; robot is not included.  The kinds of objects the Gripper can easily pick up include 3D-printed cylinders, small wooden square blocks, and most lighter things about 1-½” in diameter and up to an ounce in weight. Adding foam tape to the paddles (included) and a small counterweight to the chassis (not included) may increase lift capacity.  Take these parameters into consideration when designing autonomous robot contest rules.\u003c\/p\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eFeatures:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eEasy to assemble in less than one hour, following our\u003cspan class=\"forte\"\u003e \u003cspan class=\"rotforte\"\u003e\u003ca href=\"https:\/\/learn.parallax.com\/gripper\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eGripper assembly instructions web tutorial\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eCNC manufactured from 6061 aluminum in Rocklin, California to provide durable and lightweight performance\u003c\/li\u003e\n\u003cli\u003eCompatible with the Parallax small robot chassis for a wide number of uses\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eApplication Ideas:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eObject retrieval and sorting of many types\u003c\/li\u003e\n\u003cli\u003eSimulation of control systems and automation with real hardware\u003c\/li\u003e\n\u003cli\u003eContests using ping pong balls, 3D printed cylinders, wooden blocks, dry-erase markers\u003c\/li\u003e\n\u003cli\u003eUse with Parallax sensors to detect objects\u003c\/li\u003e\n\u003cli\u003ePing))) Ultrasonic Sensor for simple location\u003c\/li\u003e\n\u003cli\u003ePing Laser Rangefinder when used in pairs may “center” the object ahead of the robot\u003c\/li\u003e\n\u003cli\u003ePixy2 Camera to identify colored objects, their size and position\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eSpecifications:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003ePower Requirements: 4-6 VDC for servo\u003c\/li\u003e\n\u003cli\u003eCommunication interface: PWM signal for servo control\u003c\/li\u003e\n\u003cli\u003eDimensions: 3.1 in depth x 3.3 in width x 3.0 x 1.7 in tall (7.8 cm x 8.4 cm x 4.3 cm)\u003c\/li\u003e\n\u003cli\u003eOpening width:\n\u003cul\u003e\n\u003cli\u003e2.0 in (5.1 cm) with no adhesive foam installed on Paddles\u003c\/li\u003e\n\u003cli\u003e1.5 in (3.8 cm) with adhesive foam installed on Paddles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\n\u003cspan class=\"forte\"\u003eGripper 3.0 \u003c\/span\u003e\u003cspan class=\"forte\"\u003eKit Contents:\u003c\/span\u003e\n\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eCNC machined aluminum parts:\n\u003cul\u003e\n\u003cli\u003e(1) Hinge (#720-00027)\u003c\/li\u003e\n\u003cli\u003e(1) Base (#720-00028)\u003c\/li\u003e\n\u003cli\u003e(2) Arms (#720-00029)\u003c\/li\u003e\n\u003cli\u003e(2) Idler Gears (#720-00030)\u003c\/li\u003e\n\u003cli\u003e(2) Fingers (#720-00031)\u003c\/li\u003e\n\u003cli\u003e(2) Paddles (#720-00032)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eLaser-cut parts\n\u003cul\u003e\n\u003cli\u003e(2) Gear Plate (#720-00033)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eHardware parts\n\u003cul\u003e\n\u003cli\u003e(9) 4-40 ⅜” panhead screws (#700-00002)\u003c\/li\u003e\n\u003cli\u003e(1) 4-40 nut (#700-00003)\u003c\/li\u003e\n\u003cli\u003e(9) 4-40 nylon locknuts (#700-00024)\u003c\/li\u003e\n\u003cli\u003e(6) 4-40 ¼” panhead screws (#700-00028)\u003c\/li\u003e\n\u003cli\u003e(4) 4-40 3\/16” flathead screws (#710-00005)\u003c\/li\u003e\n\u003cli\u003e(1) 4-40 1-¼” panhead screw (#713-00052)\u003c\/li\u003e\n\u003cli\u003e(2) #4 stainless steel washers (#712-00011)\u003c\/li\u003e\n\u003cli\u003e(1) 1” Nylon spacer 3\/16” diameter (#713-00031)\u003c\/li\u003e\n\u003cli\u003e(2) Universal “L” brackets (#720-00011)\u003c\/li\u003e\n\u003cli\u003e(1) Universal straight bracket (#720-00012)\u003c\/li\u003e\n\u003cli\u003e(1) Torsion spring, 90 degrees (#725-00022)\u003c\/li\u003e\n\u003cli\u003e(1) Brass rod with ring terminal connector (#725-00027)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eMiscellaneous\n\u003cul\u003e\n\u003cli\u003e(1) 3M Safety glasses (#700-10003)\u003c\/li\u003e\n\u003cli\u003e(1) Super Lube white grease (#700-10019)\u003c\/li\u003e\n\u003cli\u003e(1) Combination wrench - not pictured (#700-00025)\u003c\/li\u003e\n\u003cli\u003e(1) Servo horn connector, brass (#725-00007)\u003c\/li\u003e\n\u003cli\u003e(1) Parallax Standard Servo (#900-00005)\u003c\/li\u003e\n\u003cli\u003eFoam tape, 10\" strip - not pictured (#900-00105)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRoHS CE and UKCA Declarations of Conformity are available under the Downloads tab.\u003c\/p\u003e\n\u003ch4\u003eResource Links\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/youtu.be\/jPF1fJgh2TE\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eGripper in Action video\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e(YouTube)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397215641909,"sku":"28203","price":139.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/a4391350-28203b.jpg?v=1787781809"},{"product_id":"battery-holder-5-aa-barrel-jack","title":"Battery Holder 5-AA Barrel Jack","description":"\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-default ui-state-active ui-corner-top\" role=\"tab\"\u003eBattery Holder 5-AA Barrel Jack Overview:\u003c\/h5\u003e\n\u003cdiv id=\"overview\" class=\"tabbed overview ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-body\"\u003e\n\u003cp\u003eThis battery holder accepts five 1.2 or 1.5 volt AA cells. It is designed to mount inside our rectangular brushed-aluminum chassis used with the ActivityBot, Boe-Bot, and Shield- Bot robot kits. It can also provide a portable power supply for any of our development boards that use a 2.1 mm center-positive barrel jack.\u003c\/p\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eBattery Holder 5-AA Barrel Jack Specifications:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eHolds 5 AA cell batteries\u003c\/li\u003e\n\u003cli\u003e2.1 mm center-positive barrel plug\u003c\/li\u003e\n\u003cli\u003eSecure with two 4-40 flathead screws\u003c\/li\u003e\n\u003cli\u003eCord length: ~10 in (~25 cm)\u003c\/li\u003e\n\u003cli\u003eCase dimensions: 3.12 x 2.31 x 0.67 in (8 x 5.7 x 1.7 cm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397216297269,"sku":"753-00007","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/cc21af19-753-00007.png?v=1787781810"},{"product_id":"small-robot-electronics-pack","title":"Small Robot Electronics Pack","description":"\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-default ui-state-active ui-corner-top\" role=\"tab\"\u003eSmall Robot Electronics Pack Overview:\u003c\/h5\u003e\n\u003cdiv id=\"overview\" class=\"tabbed overview ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-body\"\u003e\n\u003cp\u003eMissing a few electronic parts for your ActivityBot, Boe-Bot, or Shield-Bot or cyber:bot robot? Grab this handy pack. It's is the same bag of electronic parts — wires, LEDs, sensors, whiskers, piezospeaker,  resistors, capacitors — needed to build the tutorials' DIY sensor circuits on your robot's breadboard.\u003c\/p\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eCompatible Robot Kits\/Tutorials:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/activitybot-360-robot-kit\/\" rel=\"noopener\" target=\"_blank\"\u003ePropeller ActivityBot Robot 360° (#32600)\u003c\/a\u003e\u003ca href=\"\/products\/activitybot-360-robot-kit\/\"\u003e\u003c\/a\u003e or original (#32500)\u003c\/li\u003e\n\u003cli\u003eBASIC Stamp Boe-Bot Robot (Serial \u003ca href=\"\/products\/boe-bot-robot-kit-usb-serial\/\" rel=\"noopener\" target=\"_blank\"\u003e(28132)\u003c\/a\u003e, USB \u003ca href=\"\/products\/boe-bot-robot-kit-usb\/\" rel=\"noopener\" target=\"_blank\"\u003e(\u003cspan\u003e28832)\u003c\/span\u003e\u003c\/a\u003e, and CYBER.ORG #81031)\u003c\/li\u003e\n\u003cli\u003eShield-Bot with Arduino \u003ca href=\"\/products\/robot-shield-with-arduino\/\" rel=\"noopener\" target=\"_blank\"\u003e(Robot Shield #32335)\u003c\/a\u003e or CYBER.ORG #81033)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/cyber-bot-robot-kit-with-micro-bit\/\" rel=\"noopener\" target=\"_blank\"\u003ecyber:bot robot with micro:bit (#32700)\u003c\/a\u003e or \u003ca href=\"\/products\/cyber-bot-robot-kit-no-micro-bit\/\" rel=\"noopener\" target=\"_blank\"\u003ecyber:bot robot Kit without micro:bit (#32705)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis kit does NOT include \u003ca href=\"\/collections\/servos\/\" rel=\"noopener\" target=\"_blank\"\u003eservos\u003c\/a\u003e, \u003ca href=\"\/products\/ping-ultrasonic-distance-sensor\/\" rel=\"noopener\" target=\"_blank\"\u003ePING))) Ultrasonic Distance Sensor\u003c\/a\u003e\u003ca href=\"\/products\/ping-ultrasonic-distance-sensor\/\"\u003e\u003c\/a\u003e, or \u003ca href=\"\/products\/8-gb-microsdhc-card\/\" rel=\"noopener\" target=\"_blank\"\u003emicroSD card\u003c\/a\u003e, all of which are available separately. See the Kit Contents below for a complete parts listing.\u003c\/p\u003e\n\u003cp\u003eSee our \u003ca href=\"https:\/\/learn.parallax.com\" rel=\"noopener\" target=\"_blank\"\u003eTutorial Site\u003c\/a\u003e for how to use these components with each individual robot.\u003c\/p\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eSmall Robot Electronics Pack Contents:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e2 - 1 kΩ Resistor, 1\/4 watt (#150-01020)\u003c\/li\u003e\n\u003cli\u003e4 - 10 kΩ Resistor 1\/4 watt (#150-01030)\u003c\/li\u003e\n\u003cli\u003e2 - 2 kΩ Resistor, 1\/4 watt (#150-02020)\u003c\/li\u003e\n\u003cli\u003e8 - 220 Ω Resistor 1\/4 watt (#150-02210)\u003c\/li\u003e\n\u003cli\u003e2 - 2.2 kΩ Resistor, 1\/4 watt\u003c\/li\u003e\n\u003cli\u003e4 - 470 Ω Resistor 1\/4 watt (#150-04710)\u003c\/li\u003e\n\u003cli\u003e2 - 4.7k Ω Resistor 1\/4 watt (#150-04720)\u003c\/li\u003e\n\u003cli\u003e2 - 0.0 1µF 50v Poly Capacitor (#200-01031)\u003c\/li\u003e\n\u003cli\u003e2 - 0.1 µF Mono Radial Capacitor (#200-01040)\u003c\/li\u003e\n\u003cli\u003e2 - Infrared LED (#350-00003)\u003c\/li\u003e\n\u003cli\u003e2 - Red LED (#350-00006)\u003c\/li\u003e\n\u003cli\u003e2 - Phototransistor (#350-00029)\u003c\/li\u003e\n\u003cli\u003e2 - Infrared Receiver for Boe-Bot \u0026amp; Shield-Bot (#350-00039)\u003c\/li\u003e\n\u003cli\u003e2 - LED Standoff Base for Infrared LED (#350-90004)\u003c\/li\u003e\n\u003cli\u003e2 - LED Light Shield Cap for Infrared LED (#350-90005)\u003c\/li\u003e\n\u003cli\u003e2 - Tact Switch (#400-00002)\u003c\/li\u003e\n\u003cli\u003e2 - 3-pin Male\/Male Header (#451-00303)\u003c\/li\u003e\n\u003cli\u003e2 - Whisker wires (#700-00056)\u003c\/li\u003e\n\u003cli\u003e2 - 3\" Jumper Wires (1 Bag of 10) (#800-00016)\u003c\/li\u003e\n\u003cli\u003e1 - Piezospeaker (#900-00001)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003e\u003cspan class=\"rotforte\"\u003eNote:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e Due to quality improvements and availability, parts and quantities are subject to change without notice. Although stock codes are provided for most items in the list, they may not be available individually.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397216362805,"sku":"572-28132","price":17.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/71167848-572-28132.png?v=1787781813"},{"product_id":"small-robot-chassis","title":"Small Robot Chassis","description":"\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-default ui-state-active ui-corner-top\" role=\"tab\"\u003eSmall Robot Chassis Overview:\u003c\/h5\u003e\n\u003cdiv id=\"overview\" class=\"tabbed overview ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-body\"\u003e\n\u003cp\u003eThis sturdy aluminum Small Robot Chassis is is the central hardware for our, \u003ca href=\"\/products\/boe-bot-robot-kit-usb\/\" rel=\"noopener\" target=\"_blank\"\u003eBASIC Stamp Boe-Bot robot (\u003cspan\u003e28832)\u003c\/span\u003e\u003c\/a\u003e, \u003ca href=\"\/products\/robotics-shield-kit-for-arduino\/\" rel=\"noopener\" target=\"_blank\"\u003eRobotics Shield Kit (for Arduino) (\u003cspan\u003e130-35000)\u003c\/span\u003e, \u003c\/a\u003e\u003ca href=\"\/products\/activitybot-360-robot-kit\/\" rel=\"noopener\" target=\"_blank\"\u003ePropeller ActivityBot robots\u003c\/a\u003e\u003ca href=\"\/products\/robotics-shield-kit-for-arduino\/\" rel=\"noopener\" target=\"_blank\"\u003e\u003c\/a\u003e and our\u003ca href=\"\/products\/cyber-bot-robot-kit-with-micro-bit\/\" rel=\"noopener\" target=\"_blank\"\u003e cyber:bot robot with micro:bit (\u003cspan\u003e32700)\u003c\/span\u003e\u003c\/a\u003e. We offer it here as a replacement part, or for your own custom-designed robotics project.\u003c\/p\u003e\n\u003ch5\u003eKey Features:\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eDurable yet light-weight chassis has numerous holes and slots for mounting robot drive and control systems\u003c\/li\u003e\n\u003cli\u003eRectangular cut-outs fits all of our \u003ca href=\"\/products\/parallax-continuous-rotation-servo?\" rel=\"noopener\" target=\"_blank\"\u003eContinuous Rotation Servos (\u003cspan\u003e900-00008)\u003c\/span\u003e\u003c\/a\u003e, including the \u003ca href=\"\/products\/parallax-feedback-360-high-speed-servo\/\" rel=\"noopener\" target=\"_blank\"\u003eFeedback 360° (\u003cspan\u003e900-00360)\u003c\/span\u003e\u003c\/a\u003e .\u003c\/li\u003e\n\u003cli\u003eA 4-cell AA, 5-cell AA, or Boe-Bot Li-Ion Pack-Charger battery pack fits inside\u003c\/li\u003e\n\u003cli\u003eShaped to mount a \u003ca href=\"\/products\/1-tail-wheel-ball\/\" rel=\"noopener\" target=\"_blank\"\u003e1\" Tail Wheel Ball (#700-00009)\u003c\/a\u003ewith a single \u003ca href=\"\/products\/1-16-cotter-pin\/\" rel=\"noopener\" target=\"_blank\"\u003e1\/16\" cotter pin (700-00023)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eResource Links\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/learn.parallax.com\/tutorials-menu\/activitybot\/\" rel=\"noopener\" target=\"_blank\"\u003eActivityBot Robot web tutorial\u003c\/a\u003e\u003ca href=\"https:\/\/www.parallax.com\/learn.parallax.com\/activitybot\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/learn.parallax.com\/shieldrobot\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eRobotics with the BOE Shield for Arduino web tutorial\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397216395573,"sku":"700-00022","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/abdbf876-700-00022.png?v=1787781809"},{"product_id":"parallax-feedback-360-high-speed-servo","title":"Parallax Feedback 360° High Speed Servo","description":"\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-default ui-state-active ui-corner-top\" role=\"tab\"\u003eParallax Feedback 360° High Speed Servo Overview:\u003c\/h5\u003e\n\u003cdiv id=\"overview\" class=\"tabbed overview ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-body\"\u003e\n\u003cp\u003eThe Parallax Feedback 360° High Speed Servo provides the functionality of a light-duty standard servo, continuous rotation servo, high-speed servo, and encoder in one convenient package. This is the servo on the \u003ca href=\"\/products\/activitybot-360-robot-kit\/\" rel=\"noopener\" target=\"_blank\"\u003eActivityBot 360° Robot (\u003cspan\u003e32600)\u003c\/span\u003e\u003c\/a\u003e, and it can also be used with the micro:bit-based \u003ca href=\"\/products\/cyber-bot-robot-kit-with-micro-bit\/\" rel=\"noopener\" target=\"_blank\"\u003ecyber:bot robot (\u003cspan\u003e32700)\u003c\/span\u003e\u003c\/a\u003e as an optional upgrade.\u003c\/p\u003e\n\u003cp\u003eLike most continuous rotation servos, the Feedback 360° servo is controlled by a 50 Hz pulse-width-modulation signal.  What sets it apart is a return signal line from an internal Hall effect sensor system that provides digital angular position feedback.\u003c\/p\u003e\n\u003cp\u003eUtilizing this feedback signal, your application can cause the servo to turn to and hold any angle, much like a standard servo but with an unlimited range of motion.  Or, rotate the servo continuously at a controlled, verifiable speed—up to 120 RPM—as a robot drive motor.  Control signal response is nicely linear across the speed control range.\u003c\/p\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eFeatures:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eBidirectional, continuous, feedback-controllable rotation from -120 to 120 RPM\u003c\/li\u003e\n\u003cli\u003ePWM positional feedback across entire angular range\u003c\/li\u003e\n\u003cli\u003eInternal Hall effect position sensor, which is not subject to wear or sensor deadband as are potentiometer-style feedback systems\u003c\/li\u003e\n\u003cli\u003eNo need to manually “center” the servo\u003c\/li\u003e\n\u003cli\u003e3-pin ground-power-signal cable plugs onto the Activity Board’s 3-pin header\u003c\/li\u003e\n\u003cli\u003eSeparate single wire with female connector supplies feedback to a separate I\/O pin\u003c\/li\u003e\n\u003cli\u003eFits our Small Robot Wheel and Tire and Servo Wheels\u003c\/li\u003e\n\u003cli\u003eSupported by the cyberbot library for micro:bit, and Propeller C libraries and BlocklyProp blocks for the ActivityBot 360° robot\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eApplication Ideas:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eRobot drive motors\u003c\/li\u003e\n\u003cli\u003eSmall-scale animatronics\u003c\/li\u003e\n\u003cli\u003eInteractive artwork\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eParallax Feedback 360° High Speed Servo Specifications:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eRPM: +\/-120 w\/feedback control, 140 max (+\/- 10) @ 6 V, no load\u003c\/li\u003e\n\u003cli\u003eGears: POM\u003c\/li\u003e\n\u003cli\u003eCase: Nylon \u0026amp; fiberglass\u003c\/li\u003e\n\u003cli\u003eSpline: 25-tooth, 5.96 mm OD\u003c\/li\u003e\n\u003cli\u003ePeak stall torque @ 6 V: 2.2 kg-cm (30.5 oz-in)\u003c\/li\u003e\n\u003cli\u003eVoltage requirements: 6 VDC typical, 5–8.4 VDC max range*\u003c\/li\u003e\n\u003cli\u003eCurrent requirements: 15 mA (+\/- 10) idle, 150 mA (+\/- 40) no-load, 1200 mA stalled\u003c\/li\u003e\n\u003cli\u003eControl signal: PWM,  3–5 V 50 Hz,  1280–1720 µs\u003c\/li\u003e\n\u003cli\u003eControl signal zero-speed deadband:  1480–1520 µs (+\/- 10)\u003c\/li\u003e\n\u003cli\u003eFeedback sensor: Hall effect\u003c\/li\u003e\n\u003cli\u003eFeedback signal: PWM, 3.3V,  910 Hz, 2.7–97.1% duty cycle\u003c\/li\u003e\n\u003cli\u003eProduct weight: 1.4 oz ( 40 g)\u003c\/li\u003e\n\u003cli\u003eCable length: ~ 9.8 in (250 mm)\u003c\/li\u003e\n\u003cli\u003eDimensions: approx. 2.15 x 1.46 x 0.79 in (50.4 x 37.2 x 20 mm)\u003c\/li\u003e\n\u003cli\u003eMounting hole spacing: 10 x 49.5 mm on center\u003c\/li\u003e\n\u003cli\u003eOperating temperature range: 5 to 158 °F (-15 to +70 °C)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e*5 VDC is absolute minimum required for no-load angular position control.  5.8 to 8 VDC is recommended for continuous rotation speed control.\u003c\/p\u003e\n\u003cdiv\u003eNote: Small variations in acceleration and torque can occur between manufacturing runs. For differential-drive robots, we recommend replacing both servos at the same time to help maintain consistency in maneuvers.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch5\u003eResource Links\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.parallax.com\/tutorials\/robot\/cyberbot\/upgrade-your-cyberbot-feedback-360-servos\" rel=\"noopener\" target=\"_blank\"\u003eUpgrade Your cyber:bot with Feedback 360 Servos (Learn site)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.parallax.com\/support\/reference\/cyberbot-library-reference\" rel=\"noopener\" target=\"_blank\"\u003ecyber:bot Library Reference\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.parallax.com\/tutorials\/grade\/grades-9\/activitybot\" rel=\"noopener\" target=\"_blank\"\u003eActivityBot C and BlocklyProp Tutorials\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397216559413,"sku":"900-00360","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/5f3a6f9e-900-00360b.jpg?v=1787781812"},{"product_id":"1-tail-wheel-ball","title":"1\" Tail Wheel Ball","description":"\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-default ui-state-active ui-corner-top\" role=\"tab\"\u003e1\" Tail Wheel Ball Overview:\u003c\/h5\u003e\n\u003cdiv id=\"overview\" class=\"tabbed overview ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-body\"\u003e\n\u003cp\u003eThis molded polyethylene 1\" Tail Wheel Ball is included in all Parallax small robot kits that use our silver aluminum \u003ca href=\"\/products\/small-robot-chassis\/\" rel=\"noopener\" target=\"_blank\"\u003eSmall Robot Chassis (\u003cspan\u003e700-00022)\u003c\/span\u003e\u003c\/a\u003e, including the \u003ca href=\"\/products\/activitybot-360-robot-kit\/\" rel=\"noopener\" target=\"_blank\"\u003ePropeller ActivityBot robot (\u003cspan\u003e32600)\u003c\/span\u003e\u003c\/a\u003e, \u003ca href=\"\/products\/boe-bot-robot-kit-usb\/\" target=\"_blank\" rel=\"noopener\"\u003eBASIC Stamp Boe-Bot robot (28832)\u003c\/a\u003e, \u003ca href=\"\/products\/robotics-shield-kit-for-arduino\" rel=\"noopener\" target=\"_blank\"\u003eRobotics Shield Kit (for Arduino) (\u003cspan\u003e130-35000) \u003c\/span\u003e\u003c\/a\u003eand our \u003ca href=\"\/products\/cyber-bot-robot-kit-with-micro-bit\/\" rel=\"noopener\" target=\"_blank\"\u003ecyber:bot robot with micro:bit (\u003cspan\u003e32700)\u003c\/span\u003e\u003c\/a\u003e. We offer it here as a replacement part, or for your own custom-designed robotics project. The tail-wheel ball attaches to the \u003ca href=\"\/products\/small-robot-chassis\/\" rel=\"noopener\" target=\"_blank\"\u003eSmall Robot Chassis (\u003cspan\u003e700-00022)\u003c\/span\u003e\u003c\/a\u003e with a \u003ca href=\"\/products\/1-16-cotter-pin\/\" rel=\"noopener\" target=\"_blank\"\u003eCotter Pin \"axle (\u003cspan\u003e700-00023)\u003c\/span\u003e\u003c\/a\u003e.\" It is offered here as a replacement part.\u003c\/p\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eCompatible robot kits:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/cyber-bot-robot-kit-with-micro-bit\/\" rel=\"noopener\" target=\"_blank\"\u003ecyber:bot robot kit with micro:bit (\u003cspan\u003e32700)\u003c\/span\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/activitybot-360-robot-kit\/\" rel=\"noopener\" target=\"_blank\"\u003ePropeller ActivityBot (\u003cspan\u003e32600)\u003c\/span\u003e\u003c\/a\u003e (original or 360°)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/boe-bot-robot-kit-usb\/\" rel=\"noopener\" target=\"_blank\"\u003eBASIC Stamp Boe-Bot\u003c\/a\u003e (all versions)\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/robot-shield-with-arduino\/\" rel=\"noopener\" target=\"_blank\"\u003eShield-Bot robots with Arduino (\u003cspan\u003e32335)\u003c\/span\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eResource Links\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/robotics-accessories-hardware\/\" rel=\"noopener\" target=\"_blank\"\u003eMore robotics hardware\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397216493877,"sku":"700-00009","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/7a344b4f-700-00009.png?v=1787781813"},{"product_id":"small-robot-hardware-refresher-pack","title":"Small Robot Hardware Refresher Pack","description":"\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-default ui-state-active ui-corner-top\" role=\"tab\"\u003eSmall Robot Hardware Refresher Pack Overview:\u003c\/h5\u003e\n\u003cdiv id=\"overview\" class=\"tabbed overview ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-body\"\u003e\n\u003cp\u003eDoes your robot have a screw loose? Have a replacement ready using the Small Robot Hardware Refresher Pack!\u003c\/p\u003e\n\u003cp\u003eThis kit contains all of the components used to assemble our popular small robot platforms, including the Propeller ActivityBot, BASIC Stamp Boe-Bot, Shield-Bot with Arduino, and cyber:bot with micro:bit.\u003c\/p\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eSmall Robot Hardware Refresher Pack Contents:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e(1)  - 1\/16\" cotter pin (#700-00023)\u003c\/li\u003e\n\u003cli\u003e(10)  - 3\/8\" #4-40 pan-head screw (#700-00002)\u003c\/li\u003e\n\u003cli\u003e(3)  - 3\/16\" #4-40 Nylon flat-head screw (#710-00046)\u003c\/li\u003e\n\u003cli\u003e(5)  - 7\/8\" #4-40 pan-head screw (#710-00007)\u003c\/li\u003e\n\u003cli\u003e(10) - 1\/4\" #4-40 pan-head screw (#700-00028)\u003c\/li\u003e\n\u003cli\u003e(4)  - 1\" round #4-40 aluminum standoff (#700-00060)\u003c\/li\u003e\n\u003cli\u003e(2)  - 1\/2\" #4 aluminum spacer (#713-00007)\u003c\/li\u003e\n\u003cli\u003e(1)  - Rubber grommet (#700-00025)\u003c\/li\u003e\n\u003cli\u003e(3)  - #4 Nylon washer (#700-00015)\u003c\/li\u003e\n\u003cli\u003e(11)  - #4-40 nylon core locknut (#700-00024)\u003c\/li\u003e\n\u003cli\u003e(10)  - #4-40 nut (#700-00003)\u003c\/li\u003e\n\u003cli\u003e(3)  - #4-40 Nylon nut (#700-00036)\u003c\/li\u003e\n\u003cli\u003e(3)  - #4 Nylon spacer, 1\/2\" (#713-00051)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote: the cyber:bot robot kit with a Rev A or B cyber:bot board also used the Extra Hardware for the cyber:bot board that holds the micro:bit in place is sold separately. The cyber:bot board Rev C does not require the extra hardware.\u003c\/p\u003e\n\u003ch4\u003eResource Links\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/robotics-accessories-hardware\/\" target=\"_blank\" rel=\"noopener\"\u003eMore Boe-Bot Robot Add-ons, Accessories, and Spare Parts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397216657717,"sku":"570-35000","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/33ea4c0e-570-35000.png?v=1787781813"},{"product_id":"whisker-wire","title":"Whisker Wire","description":"\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-default ui-state-active ui-corner-top\" role=\"tab\"\u003eWhisker Wire Overview:\u003c\/h5\u003e\n\u003cdiv id=\"overview\" class=\"tabbed overview ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-body\"\u003e\n\u003cp\u003eOne replacement whisker wire for your Parallax Small Robot's navigate-by-touch sensor system.\u003c\/p\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eCompatible Robot Kits\/Tutorials:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/activitybot-360-robot-kit\/\" rel=\"noopener\" target=\"_blank\"\u003ePropeller ActivityBot Robot 360° (#32600)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/basic-stamp-kits\/\" rel=\"noopener\" target=\"_blank\"\u003eBASIC Stamp Boe-Bot Robot \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/robot-shield-with-arduino\/\" rel=\"noopener\" target=\"_blank\"\u003eShield-Bot with Arduino (Robot Shield #32335} \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/cyber-bot-robot-kit-with-micro-bit\/\" target=\"_blank\" rel=\"noopener\"\u003ecyber:bot robot with micro:bit (#32700)\u003c\/a\u003e or \u003ca href=\"\/products\/cyber-bot-robot-kit-no-micro-bit\/\" target=\"_blank\" rel=\"noopener\"\u003ewithout microbit (#32705)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eResource Links\u003c\/h4\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/learn.parallax.com\/activitybot\/navigate-touch\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eNavigate by Touch Tutorial for ActivityBot\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397216690485,"sku":"700-00056","price":1.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/322766b1-700-00056.png?v=1787781813"},{"product_id":"1-16-cotter-pin","title":"1\/16\" Cotter Pin","description":"\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-default ui-state-active ui-corner-top\" role=\"tab\"\u003e1\/16\" Cotter Pin Overview:\u003c\/h5\u003e\n\u003cdiv id=\"overview\" class=\"tabbed overview ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-body\"\u003e\n\u003cp\u003eThis 1\/16\" Cotter Pin is the \"axle\" that attaches a \u003ca href=\"\/products\/1-tail-wheel-ball\/\" rel=\"noopener\" target=\"_blank\"\u003etail-wheel ball (\u003cspan\u003e700-00009)\u003c\/span\u003e\u003c\/a\u003e attaches to the \u003ca href=\"\/products\/small-robot-chassis\/\" rel=\"noopener\" target=\"_blank\"\u003erobot chassis (\u003cspan\u003e700-00022)\u003c\/span\u003e\u003c\/a\u003e for our Parallax Small Robots.  A cotter pin is included in the \u003ca href=\"\/products\/small-robot-hardware-refresher-pack\/\" rel=\"noopener\" target=\"_blank\"\u003eSmall Robot Hardware Refresher Pack (\u003cspan\u003e570-35000)\u003c\/span\u003e\u003c\/a\u003e. It is also offered here individually as a replacement part.\u003c\/p\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eCompatible robot kits:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/cyber-bot-robot-kit-with-micro-bit\/\" rel=\"noopener\" target=\"_blank\"\u003ecyber:bot robot kit with micro:bit (\u003cspan\u003e32700)\u003c\/span\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/activitybot-360-robot-kit\/\" rel=\"noopener\" target=\"_blank\"\u003ePropeller ActivityBot (\u003cspan\u003e32600)\u003c\/span\u003e\u003c\/a\u003e (original or 360°)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/boe-bot-robot-kit-usb\/\" rel=\"noopener\" target=\"_blank\"\u003eBASIC Stamp Boe-Bot (\u003cspan\u003e28832)\u003c\/span\u003e\u003c\/a\u003e (all versions)\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/robot-shield-with-arduino\/\" rel=\"noopener\" target=\"_blank\"\u003eRobot Shield with Arduino (\u003cspan\u003e32335)\u003c\/span\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eResource Links\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/basic-stamp\/\" rel=\"noopener\" target=\"_blank\"\u003eMore Boe-Bot Robot Add-ons, Accessories, and Spare Parts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397216821557,"sku":"700-00023","price":0.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/a7995f7e-700-00023.png?v=1787781813"},{"product_id":"infrared-receiver-for-parallax-small-robots","title":"Infrared Receiver for Parallax Small Robots","description":"\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-default ui-state-active ui-corner-top\" role=\"tab\"\u003e\u003cstrong\u003eInfrared Receiver Overview:\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cdiv id=\"overview\" class=\"tabbed overview ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-body\"\u003e\n\u003cp\u003eInfrared receiver with 38 kHz carrier frequency, for use as a replacement part with the following small robot kits:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBASIC Stamp Boe-Bot\u003c\/li\u003e\n\u003cli\u003eRobot Shield Kit for Arduino\u003c\/li\u003e\n\u003cli\u003ePropeller ActivityBot\u003c\/li\u003e\n\u003cli\u003ecyber:bot for micro:bit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTwo are included in this \u003ca href=\"\/products\/small-robot-electronics-pack\/\" target=\"_blank\" rel=\"noopener\"\u003eSmall Robot Electronics Pack (\u003cspan\u003e572-28132)\u003c\/span\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/www.parallax.com\/node\/317\"\u003e\u003c\/a\u003e that is compatible with all of our Parallax Small Robots.  It is also suitable for receiving infrared signals from our Universal Remote. For robotics navigation activities, we recommend purchasing replacements in pairs, since models supplied in kits may vary.\u003c\/p\u003e\n\u003ch4\u003eResource Links\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"http:\/\/learn.parallax.com\/propeller-c-simple-devices\/ir-receiver-and-remote\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eIR Receiver and Remote Propeller C Tutorial\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"http:\/\/learn.parallax.com\/activitybot\/navigate-infrared-flashlights\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eNavigate by Infrared Flashlights Tutorial for ActivityBot\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397217870133,"sku":"350-00056","price":2.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/eae9c683-350-00039.png?v=1787781817"},{"product_id":"gripper-3-0-12-pack","title":"Gripper 3.0 12-Pack","description":"\u003ch5 class=\"ui-accordion-header ui-helper-reset ui-state-default ui-state-active ui-corner-top\" role=\"tab\"\u003eGripper 3.0 12-Pack Overview:\u003c\/h5\u003e\n\u003cdiv id=\"overview\" class=\"tabbed overview ui-accordion-content ui-helper-reset ui-widget-content ui-corner-bottom ui-accordion-content-active\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"field-body\"\u003e\n\u003cp\u003eThe \u003ca href=\"\/products\/gripper-3-0-for-parallax-small-robots\/\" rel=\"noopener\" target=\"_blank\"\u003eGripper 3.0\u003c\/a\u003e is a precision CNC-machined end-effector design for all robots using the \u003ca href=\"\/products\/small-robot-chassis\/\" rel=\"noopener\" target=\"_blank\"\u003eParallax's Small Robot Chassis\u003c\/a\u003e\u003ca href=\"\/products\/small-robot-chassis\/\" rel=\"noopener\" target=\"_blank\"\u003e\u003c\/a\u003e. The Gripper 3.0 12-Pack is offered as a companion accessory to our Robot 12-Pack Plus Kits for Classrooms, sold separately:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/cyber-bot-robot-12-pack-plus-for-classrooms\/\" rel=\"noopener\" target=\"_blank\"\u003ecyber:bot Robot 12-pack Plus for Classrooms\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/activitybot-360-12-pack-plus-for-classrooms\/\" rel=\"noopener\" target=\"_blank\"\u003eActivityBot 360° 12-Pack Plus for Classrooms\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/shield-bot-with-arduino-12-pack-plus-kit-for-classrooms\/\" rel=\"noopener\" target=\"_blank\"\u003eShield-Bot with Arduino 12-pack Plus Kit for Classrooms\u003c\/a\u003e\u003ca href=\"\/products\/shield-bot-with-arduino-12-pack-plus-kit-for-classrooms\/\" rel=\"noopener\" target=\"_blank\"\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/boe-bot-robot-12-pack-plus-kit\/\" rel=\"noopener\" target=\"_blank\"\u003eBoe-Bot Robot 12-pack Plus Kit for Classrooms\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Gripper 3.0's  single servo actuates the grab-and-lift motion with only a small amount of linear movement. The tension between the Gripper plates is determined by a torsion spring which also holds the plates down until the Gripper has closed on the object, with remaining servo motion lifting the object from the surface. The programmer only needs to determine the servos opened\/lowered, closed\/raised position and the rate at which the transition occurs without consideration of the width of the object (provided it fits within the Gripper’s paddles).\u003c\/p\u003e\n\u003cp\u003eThe kinds of objects the Gripper can easily pick up include 3D-printed cylinders, small wooden square blocks, and most lighter things about 1-½” in diameter and up to an ounce in weight. Adding foam tape to the paddles (included) and a small counterweight to the chassis (not included) may increase lift capacity. Take these parameters into consideration when designing autonomous robot contest rules.\u003c\/p\u003e\n\u003cp\u003eThe Gripper is an open source design and available for licensing if you wish to incorporate the concept into your own product.\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"forte\"\u003eFeatures:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasy to assemble in less than one hour, following our\u003cspan class=\"forte\"\u003e \u003cspan class=\"rotforte\"\u003e\u003ca href=\"https:\/\/learn.parallax.com\/gripper\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eGripper assembly instructions web tutorial\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eCNC manufactured from 6061 aluminum in Rocklin, California to provide durable and lightweight performance\u003c\/li\u003e\n\u003cli\u003eCompatible with the Parallax small robot chassis for a wide number of uses\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eApplication Ideas:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eObject retrieval and sorting of many types\u003c\/li\u003e\n\u003cli\u003eSimulation of control systems and automation with real hardware\u003c\/li\u003e\n\u003cli\u003eContests using ping pong balls, 3D printed cylinders, wooden blocks, dry-erase markers\u003c\/li\u003e\n\u003cli\u003eUse with Parallax sensors to detect objects\u003c\/li\u003e\n\u003cli\u003ePing))) Ultrasonic Sensor for simple location\u003c\/li\u003e\n\u003cli\u003ePing Laser Rangefinder when used in pairs may “center” the object ahead of the robot\u003c\/li\u003e\n\u003cli\u003ePixy2 Camera to identify colored objects, their size and position\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan class=\"forte\"\u003eSpecifications:\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003ePower Requirements: 4-6 VDC for servo\u003c\/li\u003e\n\u003cli\u003eCommunication interface: PWM signal for servo control\u003c\/li\u003e\n\u003cli\u003eDimensions: 3.1 in depth x 3.3 in width x 3.0 x 1.7 in tall (7.8 cm x 8.4 cm x 4.3 cm)\u003c\/li\u003e\n\u003cli\u003eOpening width:\n\u003cul\u003e\n\u003cli\u003e2.0 in (5.1 cm) with no adhesive foam installed on Paddles\u003c\/li\u003e\n\u003cli\u003e1.5 in (3.8 cm) with adhesive foam installed on Paddles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\n\u003cspan class=\"forte\"\u003eGripper 3.0 12-Pack Contents:\u003c\/span\u003e\u003cspan class=\"forte\"\u003e\u003cbr\u003e\u003c\/span\u003e\n\u003c\/h5\u003e\n\u003cp\u003e12 sets of the following parts per Gripper:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCNC machined aluminum parts:\n\u003cul\u003e\n\u003cli\u003e(1) Hinge (#720-00027)\u003c\/li\u003e\n\u003cli\u003e(1) Base (#720-00028)\u003c\/li\u003e\n\u003cli\u003e(2) Arms (#720-00029)\u003c\/li\u003e\n\u003cli\u003e(2) Idler Gears (#720-00030)\u003c\/li\u003e\n\u003cli\u003e(2) Fingers (#720-00031)\u003c\/li\u003e\n\u003cli\u003e(2) Paddles (#720-00032)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eLaser-cut parts\n\u003cul\u003e\n\u003cli\u003e(2) Gear Plate (#720-00033)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eHardware parts\n\u003cul\u003e\n\u003cli\u003e(9) 4-40 ⅜” panhead screws (#700-00002)\u003c\/li\u003e\n\u003cli\u003e(1) 4-40 nut (#700-00003)\u003c\/li\u003e\n\u003cli\u003e(9) 4-40 nylon locknuts (#700-00024)\u003c\/li\u003e\n\u003cli\u003e(6) 4-40 ¼” panhead screws (#700-00028)\u003c\/li\u003e\n\u003cli\u003e(4) 4-40 3\/16” flathead screws (#710-00005)\u003c\/li\u003e\n\u003cli\u003e(1) 4-40 1-¼” panhead screw (#713-00052)\u003c\/li\u003e\n\u003cli\u003e(2) #4 stainless steel washers (#712-00011)\u003c\/li\u003e\n\u003cli\u003e(1) 1” Nylon spacer 3\/16” diameter (#713-00031)\u003c\/li\u003e\n\u003cli\u003e(2) Universal “L” brackets (#720-00011)\u003c\/li\u003e\n\u003cli\u003e(1) Universal straight bracket (#720-00012)\u003c\/li\u003e\n\u003cli\u003e(1) Torsion spring, 90 degrees (#725-00022)\u003c\/li\u003e\n\u003cli\u003e(1) Brass rod with ring terminal connector (#725-00027)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eMiscellaneous\n\u003cul\u003e\n\u003cli\u003e(1) 3M Safety glasses (#700-10003)\u003c\/li\u003e\n\u003cli\u003e(1) Super Lube white grease (#700-10019)\u003c\/li\u003e\n\u003cli\u003e(1) Combination wrench - not pictured (#700-00025)\u003c\/li\u003e\n\u003cli\u003e(1) Servo horn connector, brass (#725-00007)\u003c\/li\u003e\n\u003cli\u003e(1) Parallax Standard Servo (#900-00005)\u003c\/li\u003e\n\u003cli\u003eFoam tape, 10\" strip - not pictured (#900-00105)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRoHS CE and UKCA Declarations of Conformity are available under the Downloads tab.\u003c\/p\u003e\n\u003ch4\u003eResource Links\u003c\/h4\u003e\n\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/learn.parallax.com\/gripper\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eGripper assembly web tutorial\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e(Learn site)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/youtu.be\/jPF1fJgh2TE\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eGripper in Action video\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e(YouTube)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":53397225767221,"sku":"28212","price":1668.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/6307\/2821\/files\/f950d27d-28212f.jpg?v=1787781837"}],"url":"https:\/\/parallax.com\/collections\/activitybot-360.oembed","provider":"Parallax Inc","version":"1.0","type":"link"}